CNC cutting and blanks

" Le Fleur " elliptical stringers on 84N blank Parabolic stringer set up on 61XP blank Parabolic, same as above, medium shot Elliptical stringer cut Aerial view of sFoam CNC cutting machine 9 foot noserider blank on cutting machine Close up of 9 foot noserider blank on cutting machine 9 foot noserider blank on rack Close up of outline cut on 66F & 76RP blanks 7' 4" mini gun blank, rocker cut only, before stringer installed 70 X blank, both rocker and outline cut

Test Craft

Tony Zbranek holding 6' 6" fish, made with an sFoam blank, unidirectional carbon fiber & s-glass, shaped by B.J. Williamson 7' 0" round tail with stepped deck (deck waxed!), made with an sFoam blank, shaped by B.J. Williamson 7' 7" retro thruster, made with an sFoam blank, vacuum bagged unidirectional carbon fiber & s-glass, graphics designed by Ben Pruitt, shaped by B.J. Williamson

Shaping sFoam EPS blanks

Trimming up outline - Monte Pettit, shaper Planing bottom Planing rails Using a grit blade rasp Close up of rail after rasping with grit blade Sanding with 60 - 80 grit Screening rails Close up of screened rails