Important sFoam Information

Select Topic

Blank Styles

Important!

Please read the following useful information before viewing blank styles.

Rockers

" In Stock " rocker cuts are cut and ready to ship with the standard stringers, see Price List.

" Special Order " rocker cuts are not normally stocked, and may take longer to be ship ready.

Blanks that are ordered - 'rocker cut only' - are delivered in a 23 to 25 inch width, ready to be laid out with your outlines. The thickness of our blanks includes an additional 0.125 to 0.25 inchs more than what we consider the nominal. This will allow the shaper to vary the final thickness. Of course, a specific thickness can be ordered , and all other rocker dimensions can be customized.

Outlines

Outlines can be customized in all dimensions or used with other rockers as long as they are the same length. The suggested outlines shown will require very little finishing to complete.

Outline cuts are an add - on to rocker cuts and are subject to a set up charge, see Price List.

All drawings are to scale.

Sizes and dimensions are in inches (decimal).

Please note: All dimensions can be customized!

Suggested Style Legend
G - grommet GN - gun F - fish FN - fun shape MG - mini gun	N - noserider PL - performance longboard RP - rounded pin S - squash TF - twin fin X - mysterious

Rocker dimensions on view are:

Tip to Tip length
Bottom lift at Nose
Bottom lift each 12 inch increment from nose toward tail
Bottom lift at Tail
Bottom lift each 12 inch increment from tail toward nose
Maximum thickness
Thickness at 12 inches from Nose
Thickness at 12 inches from Tail

Outline dimensions on view are:

Tip to Tip length
Maximum width
Location of maximum width (if other than the center)
Width at 12 inches from Nose
Width at 12 inches from Tail